Währungskurse: 1 GBP = 1.13 EUR; 1 USD = 0.94 EUR [mehr...]
Sprache: deutsch english

 
 

 

 

Spółdzielnia Niewidomych PROMET

[Polen]Cam switches TS series

The TS series cam switches is a brand new family of cam switches that operate under the maximum switching current of 10A. The switches feature a compact size, state-of-the-art look (in the form of a circular disc), and an ergonomic knob. Considering the method of assembly, these switches have been designed for installation on a control panel. The use of a modular structure and a single cam installed in the chamber designed for two pairs of contacts made it possible to develop a switch that controls[...]

EurofirmaDetails...


[Polen]Control push buttons NEF22

Control drives of the NEK22M series with black plastic bodies are intended for installation in standardised Ø22.5mm holes, in numerous types of control and signal equipment, or directly into bodies of machines and equipment. They are intended to work with the EF22X and EF22Y switching elements manufactured by SN Promet. NEF22 drives are comprised of the following elements: - A driver, also referred to as the button drive; - An intermediate element, also referred to as the intermediate body. Backlit[...]

EurofirmaDetails...


[Polen]Smoke vent button PD

The II PD type manual smoke vent button is intended for the controlling of smoke dampers, providing a simultaneous local 1- or 3-LED light signalling, depending on design. In the case of a 1-LED signalling, activating the button makes the LED flash red, while pressing the button on a 3-LED signalling system makes the LEDs emit continuous light and indicate the following: detection (green), failure (yellow), and activation (red). The button is equipped with passive electronic components. The[...]

EurofirmaDetails...


[Polen]Fire alarm BOX ROP

ROP-A is a manual fire alarm box type A, directly activated. As regards electric circuit it may be classified as a simple switch equipped with the electric passive elements working in the circuit of signalling alarm status. In the version with signalling, after breaking glass, an alarm status is signaled by shining of diode LED. Contact block includes two contacts: normally closed (Y) and normally opened (X) or two contacts normally closed (Y). Contact Y is opened in the supervising status and[...]

EurofirmaDetails...


[Polen]PANEL-MOUNTED DIGITAL METER NEF30-MC

NEF30-MC digital meters constitute a development of the NEF30 series that has so far included control buttons, lamps and signal indicators. All NEF30-MC indicators feature the same characteristics: the possibility of installing in a standardised Ø 30.5mm hole, and a wide range of supply voltage – 24÷230V AC/DC. Their design has been coordinated with other devices of the NEF30 series. They have been adapted to be used together with NEF30 devices, as panel-mounted meters for industrial applications.[...]

EurofirmaDetails...


[Polen]Buzzer NEF30-BUZZ

SN PROMET extends NEF30 series with buzzers fitted into mounting holes Ø30 mm. Design of buzzers is similar to the signal lamps NEF30-LD and allow for easy adaptation to the other accessories made by SN PROMET mounted in control panels while maintaining a uniform appearance of the desktop. Buzzers NEF30 can be mounted in desktops and switch cabinets or directly in the bodies of machinery and equipment. Buzzers are produced in two versions: NEF30-BUZZ - with continuous sound NEF30-BIP -[...]

EurofirmaDetails...


[Polen]Emergency stop, locked palm push buttons NEF30-DR

EMERGENCY STOP, LOCKED PUSCH BUTTONS Control push-buttons type NEF30 with metal housings are designed to be built into Ø30,5mm holes in consoles, control desks or directly in machines and equipment. There are produced two climatic versions: N/2 (for temperate climate) and W/3 (for tropical and sea climate). Each push button type NEF30 consists of the following units: - a driving unit, called the button drive - one, two or three contact blocks fastened to the drive. Fastening of push-buttons[...]

EurofirmaDetails...


[Polen]Control boxes KS

APPROPRIATION Control boxes type KS are designed to control telphers, machine tools, machines, remotely controlled devices and other electric circuits with switching voltage up to 400V, 50 ... 60Hz (AC) and 220V DC. CONSTRUCTION AND OPERATION Control boxes consist of one of more (up to 6) typical control elements. Depending on need, control boxes may be equipped with following types of push buttons: - single-stage push buttons for one control speed, - two-stage push buttons for two control[...]

EurofirmaDetails...


[Polen]Control boxes KP1, KP2 and KP3

Control boxes are equipped with signal lamps or control push buttons manufactured by SN PROMET. Casing is made in ABS. There are two colours: yellow and grey. Control boxes are adapted for installation in closed spaces almost free of dust, gas and inflamable or chemically active vapours. There is a possibility of making descriptions of all functions for lamps or push buttons on special labels on the front panel. We make wiring inside control box. TECHNICAL DATA: dimensions: KP1 - 80 x 110 x[...]

EurofirmaDetails...


[Polen]Cam switches S...J

CAM SWITCHES series S 10, 16, 25, 32, 63, 100, 160 J are a new generation of switches in current line from 10 to 160A. - small and unification switch sizes - switching angle: 30º, 45º, 60º and 90º (preferential angle 60º - maximum 6 switching positions; angle 30º - maximum 12 switching positions) - extended selection of electrical execution by catalogue - maximum number of the switching chambers is 12 (24 contacts) - all terminals and interconnections are protected against contact (IP20) -[...]

EurofirmaDetails...